ABL800 FLEX Operator's Manual 3. Installation and setup
Analysis setup, Continued
Reference
ranges and
critical limits
This program allows you to enter your own reference ranges and critical limits for
all measured and calculated parameters. For each parameter, you can choose
whether or not to differentiate between the categories of sample type, sex and age
group.
Press the check button to activate a function; press the check button again to
deactivate it.
Viewing the
reference ranges
and critical
limits
To view the reference ranges and critical limits, highlight a parameter in the
"Parameter list" box using the arrow buttons.
View the
settings for a
highlighted
parameter
Selecting sample
type
To select a sample type, highlight a parameter in the "Parameter" box, using the
arrow buttons.
Press the check button in the "Sample type" box and select a sample type, using the
arrow buttons in the box.
To deactivate sample type differentiation, press the check button again.
Selecting sex
To select sex, highlight a parameter.
Press the check button in the "Sex" box and select sex type, using the arrow
buttons in the box
.
To deactivate sex differentiation, press the check button again.
Continued on next page
3-19
To Next Page
Loading...
