R&S ZNA67 - Page 532

GUI reference
R&S
®
ZNA
532User Manual 1178.6462.02 ─ 20
Cal Kit Port <i> ← Cal. Settings
For each physical port covered by the selected calibration definition, you can select a
cal kit,cal unit, or inline calibration system. The drop-down list contains the kits for the
selected connector type and the connected calibration units.
The assignment of a calibration kit or unit to a connector type must be the same for all
physical ports covered by the calibration definition. If a calibration kit is changed, the
R&S ZNA automatically assigns the new kit to all ports with the same connector type.
Use Import Cal Kit... to add new kits to the list.
Remote command:
[SENSe:]CORRection:CKIT:SELect
Characterization ← Cal. Settings
Displays all characterizations that are stored in the active cal unit. The "Factory" char-
acterization is available for all calibration units; it ensures an accurate calibration for all
standard applications. To account for modifications of the cal unit such as the connec-
tion of additional adapters, you can generate modified sets of characterization data
using the cal unit characterization wizard. See Chapter 5.11.2.3, "Characterize Cal Unit
dialog", on page 567. By default, the R&S ZNA uses the last generated cal unit char-
acterization.
For an inline calibration system, each connected inline calibration unit has its own set
of characterizations:
Tip: If the characterization wizard is password-protected, the "Characterization" button
is unavailable. Use this functionality to prevent inadvertent activation of inappropriate
characterizations. See "Authentication" on page 568.
See also Chapter 4.5.5.3, "Characterization of calibration units", on page 183.
Remote command:
[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure
SYSTem:COMMunicate:RDEVice:AKAL:CKIT
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:STANdard:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?
Query further cal unit properties:
SYSTem:COMMunicate:RDEVice:AKAL:DATE?
SYSTem:COMMunicate:RDEVice:AKAL:FRANge?
SYSTem:COMMunicate:RDEVice:AKAL:PORTs?
SYSTem:COMMunicate:RDEVice:AKAL:WARMup[:STATe]?
Cal softtool