User Tools (Copier Features)
54
4
Duplex Mode Priority
You can select the type of Duplex
function effective when the machine
is turned on, reset, or modes are
cleared.
Limitation
âť’ Available only for Type 3.
Note
âť’ Default: 1 Sided
→
1 Sided
Orientation
• Type 1, Type 2
You can select the original orienta-
tion when making Combine/Se-
ries copies.
• Type 3
You can select the original orienta-
tion when using the Combine/Se-
ries, or two-sided originals to one-
sided Duplex function.
Note
âť’ Default: Do not Specify
âť’ When you select [Always Specify],
you must select the orientation of
originals.
Max. Number of Sets
The maximum copy quantity can be
set between 1 and 99 using number
keys.
Note
âť’ Default: 99 sheets
Original Count Display
You can set to display the count of
originals and copying pages on the
display when [On] is selected.
Note
âť’ Default: Off
Reproduction Ratio
You can select which reduce, enlarge,
or input ratio is shown on the display
with priority when [Reduce] or [En-
large] is selected.
Note
âť’ Default:
• Metric version:
• Ratio 1: 50%
• Ratio 2: 71%
• Ratio 3: 82%
• Ratio 4: 93%
• Ratio 5: 122%
• Ratio 6: 141%
• Ratio 7: 200%
• Inch version:
• Ratio 1: 50%
• Ratio 2: 65%
• Ratio 3: 78%
• Ratio 4: 93%
• Ratio 5: 121%
• Ratio 6: 129%
• Ratio 7: 155%
KirC2_GBcopyF_FM.book Page 54 Tuesday, August 26, 2003 5:42 PM