Ricoh 2015 - Specifications

Appendix
126
9
Specifications
*1
The 1394 interface board supports only TCP/IP.
*2
Use the SmartDeviceMonitor for Client port.
*3
To use IPP under Windows XP or Windows Server 2003, use the Standard IPP port.
Note, in SmartDeviceMonitor for Client however, this port does not support digest
access authentication.
*4
This can be used when the PostScript 3 module is installed.
*5
Under Windows, this function can be used with TCP/IP and NetBEUI.
*6
SMB using NetBEUI is unavailable.
Interface 100BASE-TX, 10BASE-T, IEEE 1394 (IP over 1394)
*1
, IEEE 802.11b
Frame type EthernetII, IEEE 802.2, IEEE 802.3, SNAP
Protocol • Printer (LAN-Fax)
TCP/IP
LPR
RSH
RCP
DIPRINT
FTP
IPP
*2 *3
IPX/SPX (NetWare)
AppleTalk
*4
NetBEUI
SMB
*2 *5
• Internet Fax
TCP/IP
SMTP
POP
IMAP
• Network Scanner
TCP/IP
RSH
FTP
SMTP
POP
SMB
*6
• Management Function
TCP/IP
RSH
RCP
FTP
SNMP
HTTP
TELNET (mshell)
NBT
DHCP
SNMP MIB-II, PrinterMIB, HostResourceMIB, RicohPrivateMIB