To Next Page

To Previous Page

Installing Software

The machine comes with three CD-ROMs containing various software.

The CD-ROM labeled“Scanner Driver & Document Management Utilities” con-

tains the necessary software to use the machine as a network scanner. The CD-

ROM labeled “Printer Driver & Utilities” contains the necessary software to use

the machine as a printer.

This section explains the software to use the machine as a network scanner.

Auto Run Program

When the CD-ROM is inserted into a client computer in Windows

95/98/Me/2000/XP, or Windows NT 4.0, the installer starts automatically (Au-

to Run) to install the TWAIN driver and various software.

Note

❒ Auto Run might not automatically work with certain operating system set-

tings. In this case, launch “Set up.exe” located in the CD-ROM root directory.

❒ If you want to install the software without using Auto Run, hold down the

{

{{

{Shift}

}}

} key while inserting the CD-ROM. Keep the {

{{

{Shift}

}}

} key held down until

the client computer has finished accessing the CD-ROM.

❒ If [Cancel] is pressed during installation, the installation will be stopped and

all the remaining software will not be installed. If [Cancel] has been pressed,

reinstall the remaining software after restarting the client computer.

Limitation

❒ For installation in Windows 2000/XP, or Windows NT 4.0, log in as a member

of the administrators group.

Ricoh 2015 User Manual

Questions and Answers: