Ricoh 2015 - Configuring the Network Interface Board

Appendix
108
9
Configuring the Network Interface Board
The network interface board settings can be displayed using the commands be-
low.
• telnet : Use the “show” command. See p.85 “Network interface board config-
uration settings information”.
Item name Meaning
Common
Mode
Protocol Up/Down “Up” means active; “Down” means inactive.
AppleTalk
TCP/IP
NetWare
SMB
IP over 1394
*1
SCSI print
*1
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location Internal version number
Contact
Soft switch Internal version number
AppleTalk
Mode AppleTalk protocol selected
Net Network number
Object Macintosh printer name
Type The type of printer
Zone Name of zone the printer belongs to