Using the Printer Function
50
5
Configuring the Printer
Use the control panel to activate the
AppleTalk protocol. (The default is
active.)
Reference
For more information about con-
figuration, see p.26 “Interface Set-
tings/Network”.
Changing the Printer Name
If the network has several similar
model printers, the names will be the
same. Printers with the same name
will have slightly different names in
the [Chooser] dialog box. For example,
three printers named “printer” will
appear in the [Chooser] dialog box as
“ printer0” , “printer1” , and
“printer2”.
To change the printer name in the
Macintosh EtherTalk environment,
use Printer Utility for Mac included
on the CD-ROM labeled “Printer
Drivers and Utilities”.
Changing the Zone
To change the zone configuration in a
Macintosh EtherTalk environment,
use Printer Utility for Mac included
on the CD-ROM labeled “Printer
Drivers and Utilities”.
Reference
For more information about using
Printer Utility for Mac, see Post-
Script 3 Supplement, provided as a
PDF file on the CD-ROM labeled
“Operating Instructions for Print-
er/Scanner”.
To Next Page
Loading...
