Ricoh 2015 - Connecting the Machine to a Telephone Line and Telephone; Connecting the Telephone Line; Selecting the Line Type

Appendix
106
9
Connecting the Machine to a Telephone
Line and Telephone
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connec-
tor.
Important
❒ Make sure the connector is the correct type before you start.
❖
❖❖
❖ Where to connect the machine
1.
G3 interface unit connector
2.
External telephone connector
Selecting the Line Type
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Note
❒ This function is not available in some areas.
Select the line type using “Key Operator Settings”. See p.98 “Selecting Di-
al/Push Phone”.
1
2
Kir-C2-AEcombine_F_FM.book Page 106 Monday, September 29, 2003 11:39 AM