To Next Page

To Previous Page

Specifications

❖

❖❖

❖ Combine

• When using this function, the machine selects the reproduction ratio auto-

matically. This reproduction ratio depends on copy paper sizes and the

number of originals.

• The reproduction ratios you can specify are 50–200%.

• If the calculated ratio is under the minimum ratio, it is automatically ad-

justed to within available range. However, with some ratios, parts of the

image might not be copied.

• You cannot use custom size paper.

• If the orientation of originals is different from that of the copy paper, the

machine will automatically rotate the image by 90° to make copies proper-

ly.

• If the number of originals placed is less than the number specified for com-

bining, the last page segment is left blank as shown.

❖

❖❖

❖ Duplex Margin (Type 3 only)

• If you set a binding margin that is too wide, part of the image may not be

copied.

• When making copies using the Combine function, the binding margin is

added to the copies when combining is finished.

KirC2_GBcopyF_FM.book Page 66 Tuesday, August 26, 2003 5:42 PM

Ricoh 2015 User Manual

Questions and Answers: