Setting Originals
30
3
❖
❖❖
❖ When placing the originals so that
the top edges touch the back of the
ADF
❖
❖❖
❖ When placing the top edges of the
originals first
When using the machine as a
network TWAIN scanner, this
orientation is the standard set-
ting for the TWAIN driver. Nor-
mally, use this orientation for
placing originals.
Note
❒ Originals of the same width and
different length can be placed at
the same time. Place the origi-
nals as shown:
1. ADF placement orientation
2. Height
Reference
p.32 “Mixed size selection”
❒ Originals are scanned in the in-
serted order, starting with the
topmost page.
C
CC
C
Select the original orientation ac-
cording to the orientation of the
placed originals.
Reference
p.27 “Specifying original orien-
tation and setting originals”
Proceed to p.31 “Original Orienta-
tion and Scan Area”.
AAH006S
AAH007S
AAH022S
To Next Page