Ricoh 2015 - Displaying the Counter for Each User Code; If You Cannot Make Copies As You Want

Settings You Can Change with User Tools
29
3
❖
❖❖
❖ Output: Copier (copier)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 1
❖
❖❖
❖ Output: Facsimile (facsimile)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 2
❖
❖❖
❖ Output: Printer (printer)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 1
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❖
❖❖
❖ Display Contrast
You can adjust the brightness of the display.
❖
❖❖
❖ Key Repeat
You can select whether or not to use the key repeat function.
Note
❒ Default: On
❖
❖❖
❖ Measurement Unit
You can switch the measurement between “mm” and “inch”.
Note
❒ Default: mm
Output tray settings
Limitation
❒ You cannot use the Internal tray 2 as the output tray when copying from the
bypass tray.