Troubleshooting
68
5
-
--
-Out of paper display message
If the paper tray runs out of paper, “
Out of paper. Load it, then press
[Exit].
” appears on the display, asking you to add more paper.
Note
âť’ If there is paper left in the other paper trays, you can receive messages as usu-
al, even if the message appears on the display.
❒ You can turn this function on or off with the User Parameters. See p.80 “User
Parameters”, Facsimile Reference <Advanced Features> (switch 05, bit 7).
-
--
-Network error display message
If the "
Check whether there are any network problems.
" message appears,
the machine is not correctly connected to the network or the settings of the ma-
chine is not correct. If you do not need to connect the machine to the network,
you can select so that the message disappear and the key goes out with User Pa-
rameters. See p.80 “User Parameters”, Facsimile Reference <Advanced Features>
(switch 21, bit 6).
Note
âť’ When you restart connecting the machine to the network, make sure to set
"Display" with User Parameters. Otherwise, you cannot check the status of
the network connection.
Kir-C2-AEcombine_F_FM.book Page 68 Monday, September 29, 2003 11:36 AM
To Next Page
Loading...
Need help?
General
