Ricoh 2015 - Page 559

Editing Receiver's Fax Information Via Web Browser
65
5
B Under [Internet Fax Data Format],
set the items of fax information
to meet the receiver's specifica-
tions, except for [Select mode].
Note
❒ If [Simple mode] is selected,
the fax information cannot be
set. Select the T.37 full mode
compatible receiver in step
A, when [Full mode] is select-
ed.
C Click [OK] in the upper right.
The [
Address List
] page appears.
Note
❒ To cancel the setting, click
[Cancel] in the upper right.
When a new destination is added
A Click [Add].
The [Add User] page appears.
B Make sure [User] is selected in
the [
Select User or Group.
] list.
C Enter the registration number,
name, and e-mail address, and
then make the necessary set-
tings.
Note
❒ Settings under [Internet Fax
Data Format] become available
after you enter the e-mail ad-
dress.
D Under [Internet Fax Data Format],
click [Full mode], and then make
the other settings according to
the receiver's specifications.
Note
❒ If you select [Simple mode],
you cannot set the fax infor-
mation.
E Click [OK] in the upper right.
The [Address List] page appears.
Note
❒ To cancel the setting, click
[Cancel] in the upper right.
F
FF
F
Close the Web browser.
Kir-C2-AEcombine_F_FM.book Page 65 Monday, September 29, 2003 11:39 AM