Ricoh 2015 - Page 677

Printing with NetWare
55
5
B In the [Print Server Name:] box,
enter the print server name.
Limitation
❒ Enter up to 47 alphanumeric
characters.
C In the [File Server Name:] box, en-
ter the name of the file server
in which the print server is to
be created.
By clicking [Browse…], you can
select a file server among those
listed in the [Browse…] dialog
box.
Limitation
❒ Enter up to 47 alphanumeric
characters.
D In the [NDS Tree:] box, enter the
NDS tree name in which to
make the file server.
By clicking [Browse…], you can
select the NDS tree name and
NDS context name from their
lists.
Limitation
❒ Enter up to 32 alphanumeric
characters (“-” and “_” can
be used).
E In the [NDS Context:] box, enter
the context of the print server.
Limitation
❒ Enter up to 127 alphanumer-
ic characters.
Note
❒ As context, object names are
entered in lower object order
and divided by a period. For
example, if you want to cre-
ate a print server into NET
under d, enter “d”.
F In the [Print Server Operation
Mode] area, click [As Print Serv-
er].
G Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
I
II
I
Quit SmartDeviceMonitor for
Admin.
After this step, operate the ma-
chine by following the procedure
from step
I
on p.58 “NetWare 4.x,
5/5.1, 6”. However, steps
N
-C and
N
-D are not required.