Ricoh 2015 User Manual

67
7. Using SmartDeviceMonitor
for Admin
SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Admin, not only can you monitor the status of
network printers, but you can also change the configuration of the network in-
terface board using TCP/IP or IPX/SPX protocol.
❖
❖❖
❖ Protocol Stack
*1
IPX is used for monitoring the machines.
❖
❖❖
❖ What can it do?
• Limit settings done from the control panel, and disable changes made to
certain items.
• Select of paper type loaded in the machine.
• Switch to, and come out of Energy Saver mode.
• Check information about printing, paper quantity, etc.
• Simultaneously monitor multiple printers. When there are many printers,
you can create groups and classify printers to facilitate management.
Operating system Protocol stack
Microsoft Windows 95/98/Me TCP/IP provided with Windows 95/98/Me
IPX
*1
/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows
95/98/Me
Novell Client for Windows 95/98/Me
Microsoft Windows 2000 TCP/IP provided with Windows 2000
IPX
*1
/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000/XP
Microsoft Windows XP TCP/IP provided with Windows XP
IPX
*1
/SPX provided with Windows XP
Novell Client for Windows NT/2000/XP
Microsoft Windows Server 2003 TCP/IP provided with Windows Server 2003
IPX
*1
/SPX provided with Windows Server 2003
NetWare Client provided with Windows Server 2003
Microsoft Windows NT 4.0 TCP/IP provided with Windows NT 4.0
IPX
*1
/SPX provided with Windows NT 4.0
Client Service for NetWare provided with Windows NT
4.0
Novell Client for Windows NT/2000/XP

Ricoh 2015 Specifications

General

Brand	Ricoh
Model	2015
Category	All in One Printer
Language	English