No. Message Action
38
Remove Misfeed Open Top
Cover/Press Form Feed,
remove misfeed
Paper scraps remain in the machine, or a jammed sheet has
not been removed. Press [Form Feed] to eject the sheet, and
then, remove the paper from the area below the top cover.
39
Paper Misfeed Bypass Tray/
Reset Paper
(J028/J029/J035)
Paper has jammed in or failed to feed from the multi bypass
tray. Remove the paper from multi bypass tray.
40
Paper Misfeed Tray 2/ Reset
Paper
--or--
Paper Misfeed Tray 3/ Reset
Paper
(J028/J029/J035)
Paper has jammed in or failed to feed from Tray 2, or 3.
Remove the paper from Tray 2, or 3.
41
Paper Misfeed Tray 1/ Reset
Paper
Paper has jammed in or failed to feed from Tray 1. Remove
the paper from Tray 1.
42
Remove Misfeed Open Top
Cover / Press Form Feed,
remove misfeed
Paper has jammed in or failed to feed from in the area
below the top cover. Remove the paper from the area below
the top cover.
43
Paper Misfeed Remove Duplex
or/ Tray2 Rear Cover remove
misfeed
(J028/J029/J035)
Paper has jammed in or failed to feed from the duplex unit or
feed unit of Tray 2. Remove the paper.
44
Remove Misfeed Duplex Unit/
Remove Misfeed from Duplex
Unit
Paper has jammed in or failed to feed from the duplex unit.
Remove the paper from the duplex unit.
45
Reset Duplex Unit correctly
(J028/J029/J035)
The duplex unit is not mounted correctly and/or the duplex
unit cover is open. Mount the duplex unit correctly and close
the duplex unit cover.
46
Paper Misfeed Remove all
Rear/Covers then remove
misfeed
(J028/J029/J035)
The fed paper has failed to reach the Tray 2 relay sensor.
Remove the paper.
Troubleshooting Guide
101