Ricoh Aficio SP 5200DN User Manual

Setting Description Setting Value
IPsec Requirement Level
Specify whether to only
transmit using IPsec, or to allow
clear text transmission when
IPsec cannot be established.
(auto setting)
• Use When Possible
• Always Require
Authentication Method
Specify the method for
authenticating transmission
partners.
(auto setting)
• PSK
•
Certificate
If you specify "PSK", you must
then set the PSK text (using
ASCII characters).
If you are using "PSK", specify
a PSK password using up to 32
ASCII characters.
If you specify "Certificate", the
certificate for IPsec must be
installed and specified before it
can be used.
Phase 1 Hash Algorithm
Specify the Hash Algorithm to
be used in phase 1.
(auto setting)
• MD5
•
SHA1
Phase 1 Encryption Algorithm
Specify the encryption
algorithm to be used in phase
1.
(auto setting)
• DES
•
3DES
Phase 1 Diffie-Hellman Group
Specify the Diffie-Hellman
group number.
(auto setting)
• 1
•
2
• 14
Phase 1 Validity Period
Specify the time period for
which the SA settings in phase
1 are valid.
Set in seconds from 300 sec. (5
min.)
to 172800 sec. (48 hrs.).
Phase 2 Security Protocol
Specify the security protocol to
be used in Phase 2.
(auto setting)
• ESP
•
AH
• ESP+AH
Transmission Using IPsec
109
7

Ricoh Aficio SP 5200DN Specifications

General

Brand	Ricoh
Model	Aficio SP 5200DN
Category	Printer
Language	English