Ricoh IS200e - Information to Register in [User Authentication Management]

Configuring Settings Using a Web Browser
97
3
❖
❖❖
❖ FTP Only (File Name Unchangeable)
you can send in FTP protocol with the file name fixed setting
Note
❒ You can view all the information displayed, regardless of the screen size, but
the character line may be returned. A scroll bar may be equipped.
❒ When you shift to another screen during configuration, the configured data
will be discarded at the time.
Information to Register in [User Authentication Management]
For security reasons, you can configure and register the authentication informa-
tion. Or you can select “do not authenticate”.
Note
❒ After password authentication, you can configure [User Authentication Manage-
ment] menu by:[Configuration]→[Basic Settings]→[User Authentication Manage-
ment]
❖
❖❖
❖ Authentication at Sending File
You can select either [Off] (default) or [On] by radio button click.
❖
❖❖
❖ Authentication at Printing
You can select either [Off] (default) or [On] by radio button click.
❖
❖❖
❖ Authentication Method
After you select [On] to authenticate at either Send File or Print, or both, you
can select a type either [Windows Authentication] or [LDAP Authentication] by ra-
dio button click.
❖
❖❖
❖ Domain Name
Only when you have selected [Windows Authentication] type, you can configure
this by entering 1 to 50 alphanumeric including “-” (hyphen) and “.” (dot);
you cannot enter “-” (hyphen) and “.” (dot) in the first character.
❖
❖❖
❖ Main Host Name
Only when you have selected [Windows Authentication] type, you can configure
this by entering 1 to 50 alphanumeric including “-” (hyphen) and “.” (dot);
you cannot enter “-” (hyphen) and “.” (dot) in the first character.
❖
❖❖
❖ Sub Host Name
Only when you have selected [Windows Authentication] type, you can configure
this by entering 1 to 50 alphanumeric including “-” (hyphen) and “.” (dot);
you cannot enter “-” (hyphen) and “.” (dot) in the first character.
❖
❖❖
❖ LDAP Server IP Address
Enter this item when you have selected [LDAP Authentication]. You can config-
ure this by entering the numeric characters from 0 to 9 in the form of
xxx.xxx.xxx.xxx, respective sections of this address can be configured from
000 to 255.