Ricoh IS200e - Scan Settings; Information to Register in [Scan Settings]

Scan Settings
75
3
Scan Settings
You can configure and register up to four sets of settings for scanning, when per-
forming a Send Scan (e-mail, Send File (SMB/FTP) or Delivery Server) opera-
tion.
Memory areas named “Default”, “User 1”, “User 2”, and “User 3” are available
for registering Scan Settings. You can easily recall the settings you have regis-
tered to “User 1”, “User 2”, or “User 3”, which means you don’t have to config-
ure detailed settings each time you send scan data. Settings registered to
“Default” apply when you send scan data without selecting “User 1”, “User 2”,
or “User 3”, or without manually configuring Scan Settings.
Reference
The System Settings menus are available by pressing the {
{{
{User Tools}
}}
} key.
For configuration using the System Settings menus, see p.55 “Configuring
[System Settings]”.
Information to Register in [Scan Settings]
❖
❖❖
❖ Scan Type
This item lets you select a scan type. The number of colors and gradation lev-
els are automatically selected according to the selected scan type.
• Color:Full Color
Scans high-definition color photos.
• Black and White:Text
Scans standard originals containing mainly text as black-and-white binary
images.
• Black and White:Text/Photo
Scans originals containing graphs, photos, and text as black-and-white bi-
nary images.
• Black and White:Photo
Scans originals containing mainly black-and-white photos and graphs as
black-and-white binary images.
• Black and White:Gray Scale
Scans originals containing mainly black-and-white photos, and color pho-
tos as black-and-white photos.
Selecting [ Gray Scale ] reduces the number of original pages that can be
scanned at a time.
Note
❒ Selecting [Color:Full Color] reduces the number of original pages that can be
scanned at a time.