Ricoh IS200e - Outline to Use as a TWAIN Scanner; To Use as a Network TWAIN Scanner; To Use as a USB TWAIN Scanner

Configuring the Scanner Settings
40
3
Outline to Use As a TWAIN Scanner
To Use as a Network TWAIN Scanner
The following overview diagram shows the preparation steps for using this ma-
chine as a network TWAIN scanner.
To Use as a USB TWAIN Scanner
The following overview diagram shows the preparation steps for using this ma-
chine as a TWAIN scanner.
*1
If you use this machine as a TWAIN scanner, you need a TWAIN-compliant applica-
tion on the client computer you use. DeskTopBinder Lite that comes with this ma-
chine is a TWAIN-compliant application.
Reference
For configuration items, see p.41 “Initial Scanner Setup” and for operation of
configuration, see p.175 “Using the TWAIN Scanner Function”.
Configure [
1.System Settings
] on this machine See p.51 “System Settings”
Install the network TWAIN driver on a client computer
*1
See p.112 “Software for Us-
ing a TWAIN Scanner”.
Install the USB TWAIN driver on a client computer
*1
See p.112 “Software for Us-
ing a TWAIN Scanner”.
Connect the scanner and client computer with a USB cable.
See p.27 “Connecting to a
Computer via USB Cable”.