Sending Scan File by E-mail
142
5
Checking Transmission
Results
Follow the steps below to check trans-
mission results using the WebStatus-
Monitor on a client computer.
A
AA
A
Start a Web browser, and then en-
ter this machine's IP address in
the address bar.
Reference
See p.90 “To access this machine
from a Web browser”
Note
❒ You can confirm the IP address
of this machine by selecting [IP
Address] in [1.System Settings]
under the Scanner Features
menu.
The top page of the WebStatus-
Monitor appears.
B
BB
B
On the main menu, click [Admin In-
fo.].
C
CC
C
On the sub-menu, click [Send In-
fo.].
D
DD
D
Check the transmission result.
Note
❒ Up to 20 transmission results
are displayed in the [Send Info.]
list at a time. Each time you per-
form a Send Scan operation, the
list is updated and only the lat-
est 20 transmission results are
displayed.
❒ The transmission results are
cleared when the power of this
machine is turned off.
❒ In the [Status] column, [Standby],
[Sending], [Complete], or [Not
Sent] is displayed.
❒ If an e-mail or a file could not be
sent for any reason, [Not Sent]
appears in the [Status] column.
❒ The [Send Type] column indi-
cates the type of transmission:
[E-mail], [SMB], [FTP], [Delivery]
or [Print Scan].
❒ The number of original pages
that are scanned appears in the
[Pages] column.
To Next Page
Loading...
