Outline to Use Scan to Print
37
3
Outline to Use Scan to Print
The following overview diagram shows the preparation steps for printing scan
data by Print Scan. Note that the underlined
steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 “Initial Scanner Setup” for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.89 “Accessing the Scanner”
Reference
For configuration items, see p.41 “Initial Scanner Setup” and for operation of
configuration, see p.161 “Printing Scanned Image Files”.
Configure
[
1.
System Settings
]
on this machine See p.51 “System Settings”
Configure
[
Printer
]
and [Custom Title] settings
on the Web Status Monitor
See p.105 “Information to register in
[Printer]”
See the Web Status Monitor Help for
details about Custom Title settings.
Configure [General Settings] on the Web Status
Monitor
See the Web Status Monitor Help.
Recall the Settings on the Web Status Monitor
See p.108 “Recalling the Settings” for
details.
To Next Page
Loading...
