Ricoh IS200e - Print Scan Settings; Information to Set in [Print Scan Settings]

Configuring the Scanner Settings
72
3
Print Scan Settings
This section describes all the setup items included in Print Scan Settings menu,
and shows you how to configure these settings using the control panel of this
machine.
Reference
The System Settings menus are available by pressing the {
{{
{User Tools}
}}
} key.
For configuration using the System Settings menus, see p.55 “Configuring
[System Settings]”.
Information to Set in
[
Print Scan Settings
]
❖
❖❖
❖ Max. Number of Copies
This item lets you set an upper limit for the number of copies that you can
specify when you perform a Print Scan operation, within the range of 1 to 999.
Note
❒ You can also configure this setting by selecting [Configuration] → [Print Scan
Settings] → [Print Scan] on the Web Status Monitor.
❖
❖❖
❖ Color/Black and White
This item lets you select default scan setting for Print Scan, between “Color”
and “Black and White”.
• Color:Text
Scans standard originals containing mainly text as color images.
• Color:Text/Photo
Scans originals containing graphs, photos, and text as color images.
• Color:Photo
Scans originals containing mainly color photos and graphs as color images.
• Black and White:Text
Scans standard originals containing mainly text as black-and-white binary
images.
• Black and White:Text/Photo
Scans originals containing graphs, photos, and text as black-and-white bi-
nary images.
• Black and White:Photo
Scans originals containing mainly black-and-white photos and graphs as
black-and-white binary images.
Note
❒ Scan is performed with black and white or in gray scale, depending on the
setting you have configured in the Print Settings menu. If you select “Text”
as [Scan Type] in the Print Settings menu, scan is performed with black and
white. If you select “Text/Photo” or “Photo”, scan is performed with gray
scale.