Before Sending Scan Data
129
5
• When the message “
Connecting with PC...
” is displayed on the display
panel, the machine is used from a client computer, and scanning is in
progress. Wait until the job now in progress ends.
• When the message “
Connecting with PC... Set original(s) and se-
lect the settings from the PC.
” is displayed on the display panel, the
machine is standing by for the network TWAIN. Press [Exit].
If there is no [Exit], the Network TWAIN exclusive standby screen is displayed.
Set [6.Select Method] (in [2.Send Scan Settings] under the Scanner Features menu)
to “Send File/TWAIN”, and then restart the machine.
• When a send file path name is displayed at the second line of the screen, the
standby screen for [Enter Custom Send File] is displayed. In this case, press [Ex-
it].
To Next Page
Loading...
