Configuring the Scanner Settings
66
3
❖
❖❖
❖ Auto Update Destination List
• When “Delivery Server/TWAIN” is selected under [6.Select Method]
Select whether to update the contents of the Address Book automatically
with the latest data from the delivery server. When “On” is selected, the
Address Book is updated each time you press [Dest.] or [Sender] on this ma-
chine. When “Off” is selected, the Address Book is updated only when the
power is turned on.
• When “Send File/TWAIN” is selected under [6.Select Method]
Select whether to update the contents of the destination lists of e-mail ad-
dresses, send file paths, and FTP servers automatically with the latest data
registered using the Web Status Monitor’s [E-mail Address], [Send File Path]
and [FTP Server]. When “On” is selected, the destination list is updated
each time you press [E-mail] on this machine. When “Off” is selected, the
destination list is updated only when the power is turned on.
Note
❒ You can select “Off” if you do not plan to update the Address Book or the
destination lists frequently. Selecting “Off” makes this machine react
quickly when you press [E-mail].
❖
❖❖
❖ Unit of Measure
This item lets you select a unit of measurement that is used when you specify
values for [Custom Size] of [Original Size] setting. You can select between “mm”
and “inch”.
❖
❖❖
❖ sRGB
This item lets you select whether to scan originals with the sRGB Color
matching function enabled. This function is available only when you select
“Color:Full Color” in [Scan Type] under [Scan Settings].
• When “Off” is selected, the sRGB Color matching function is disabled.
• When “sRGB 1” is selected, the original's Color tone is accurately repro-
duced, but the paper's yellowish tone may be reproduced also.
• Selecting “sRGB 2” reduces the paper's yellowish tone.
Note
❒ Selecting “sRGB 1” or “sRGB 2” disables the [Image Density] setting. (⇒
p.78)
❖
❖❖
❖ End of Scan Option
This item lets you select how this machine behaves after a scanning operation
ends. The option selected for this item applies scanning performed in a Send
Scan (Delivery Server or Send Mail/Send File) operation.
Note
❒ You can perform additional scan operation after a scanning from the expo-
sure glass is finished, regardless of the setting of this item.
❒ When you perform a Print Scan operation, the option selected for this set-
up item does not apply.
To Next Page
Loading...
