Configuring the Scanner Settings
68
3
• Clear Settings after Each Scan Job
The initial screen displayed immediately after power-on appears on the
display panel of this machine, and files are sent.
Note
❒ When you perform the [Enter Custom Send File] operation from the Web
Status Monitor, the [Enter Custom Send File] settings are retained after
files are sent. Press [PrevMenu] to return to the initial screen when the
power is turned on.
❖
❖❖
❖ Erase Border
When you perform a scan operation, it may happen that a borderline is repro-
duced on scan data by the shadow of paper ends of the original. This machine
can erase the borderline using a white line, which width you can specify us-
ing [Erase Border]. You can select a line width from 1mm (0.04”) to 5mm (0.2”).
Select “0mm” if you do not want to have the borderline erased. The option se-
lected for this item applies scanning performed in a Send Scan (Delivery Serv-
er or Send Mail/Send File) operation.
❖
❖❖
❖ ADF Thin Paper
This item is disabled in this machine.
❖
❖❖
❖ Job Delivery Data Max. Setting
This item lets you select whether to limit the maximum file size of a document
to be sent by using the delivery server. When you set limitation of the size,
you can specify it within the range of 1 MB to 64 MB, in 1MB increments.
Note
❒ You can also configure this setting by selecting [Configuration] → [Delivery
Settings] → [Delivery] on the Web Status Monitor.
❖
❖❖
❖ Wait Time for Additional Scanning (WSM)
When “Show options after each scan job” is selected for [End of Scan Option],
enter the time during which the setting menu appears. Specify the time in sec-
onds within the range of 3 through 900. When the specified time elapses, the
initial screen displayed immediately after power-on appears on the control
panel and files are sent.
Note
❒ This setting can only be configured using the Web Status Monitor.
❖
❖❖
❖ Scanned Sheet Counter
This item displays the number of scanned sheets, by ADF and the exposure
glass respectively.
❖
❖❖
❖ Scanned Page Counter
This item displays the number of scanned pages, by ADF and the exposure
glass respectively.
To Next Page
Loading...
