Rohde & Schwarz ESW Series - Page 267

Data Management
R&S
®
ESW
267User Manual 1177.6298.02 ─ 08
Recall in New Channel / Recall in Current Channel
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, select "Recall in New Channel" to
activate a new channel with the stored settings. Select "Recall in Current Channel" to
replace the current "Channel" settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe on page 590
12.3.2.4 Startup Recall Settings
Access: "Open" icon in the toolbar > "Startup Recall"
Startup Recall..............................................................................................................267
Selecting Storage Location - Drive/ Path/ Files...........................................................267
File Name....................................................................................................................268
Comment.....................................................................................................................268
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the selected file are loaded each time the instrument is started or preset. If deactivated,
the default settings are loaded.
Note that only instrument settings files can be selected for the startup recall function,
not "Channel" files.
Remote command:
MMEMory:LOAD:AUTO on page 589
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the <instrument> or an external drive.
Storing and Recalling Instrument Settings and Measurement Data