Rohde & Schwarz ESW Series - Page 345

General Instrument Setup
R&S
®
ESW
345User Manual 1177.6298.02 ─ 08
Using service functions
The service functions are not necessary for normal measurement operation. Incorrect
use can affect correct operation and/or data integrity of the R&S ESW.
Therefore, only user accounts with administrator rights can use service functions and
many of the functions can only be used after entering a password. These functions are
described in the instrument service manual.
Service Function......................................................................................................... 345
Send............................................................................................................................345
Numeric Mode.............................................................................................................346
Clear History............................................................................................................... 346
Password.................................................................................................................... 346
Clear Results...............................................................................................................346
Save Results...............................................................................................................346
Result List................................................................................................................... 346
Service Function
Selects the service function by its numeric code or textual name.
The selection list includes all functions previously selected (since the last "Clear His-
tory" action).
Remote command:
DIAGnostic:SERVice:SFUNction on page 673
Send
Starts the selected service function.
Remote command:
DIAGnostic:SERVice:SFUNction on page 673
Service Functions