Rohde & Schwarz ESW Series - Page 555

Remote Commands in the Receiver Application
R&S
®
ESW
555User Manual 1177.6298.02 ─ 08
<m> Marker
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:BELow
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:BELow
This command moves a marker vertically to the next higher minimum level for the cur-
rent frequency.
The search includes only frames below the current marker position. It does not change
the horizontal position of the marker.
Suffix:
<n>
.
Window
<m> Marker
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:NEXT
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:NEXT
This command moves a marker vertically to the next higher minimum level for the cur-
rent frequency.
The search includes all frames. It does not change the horizontal position of the
marker.
Suffix:
<n>
.
Window
<m> Marker
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum[:PEAK]
This command moves a marker vertically to the minimum level for the current fre-
quency.
The search includes all frames. It does not change the horizontal position of the
marker.
If the marker hasn't been active yet, the command first looks for the peak level for all
frequencies and moves the marker vertically to the minimum level.
Suffix:
<n>
.
Window
<m> Marker
Delta Marker Configuration
Commands to configure delta markers in spectrograms described elsewhere.
●
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 548
●
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 548
●
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 548
Analysis