Rohde & Schwarz ESW Series - Page 548

Remote Commands in the Receiver Application
R&S
®
ESW
548User Manual 1177.6298.02 ─ 08
Delta Markers
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT........................................................... 548
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT...........................................................548
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK].........................................................548
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt.......................................................... 549
CALCulate<n>:DELTamarker<m>:MINimum:LEFT............................................................ 549
CALCulate<n>:DELTamarker<m>:MINimum:NEXT............................................................549
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]..........................................................549
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt........................................................... 550
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT
This command moves a delta marker to the next higher value.
The search includes only measurement values to the left of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Search Next Peak" on page 238
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
This command moves a marker to the next higher value.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
1..n
Window
<m> 1..n
Marker
Manual operation: See "Search Next Peak" on page 238
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command moves a delta marker to the highest level.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Suffix:
<n>
.
Window
<m> Marker
Analysis