Rohde & Schwarz ESW Series - Page 238

Common Analysis and Display Functions
R&S
®
ESW
238User Manual 1177.6298.02 ─ 08
Functions to position markers in the Spectrum application described elsewhere:
●
"Settings Coupled" on page 234
Peak Search................................................................................................................238
Search Next Peak....................................................................................................... 238
Search Minimum......................................................................................................... 238
Search Next Minimum.................................................................................................238
Peak Search
Sets the selected marker/delta marker to the maximum of the trace. If no marker is
active, marker 1 is activated.
For spectrogram displays, define which frame the peak is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 546
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 548
Search Next Peak
Sets the selected marker/delta marker to the next (lower) maximum of the assigned
trace. If no marker is active, marker 1 is activated.
For spectrogram displays, define which frame the next peak is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 546
CALCulate<n>:MARKer<m>:MAXimum:RIGHt on page 546
CALCulate<n>:MARKer<m>:MAXimum:LEFT on page 545
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 548
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 549
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 548
Search Minimum
Sets the selected marker/delta marker to the minimum of the trace. If no marker is
active, marker 1 is activated.
For spectrogram displays, define which frame the minimum is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 547
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 549
Search Next Minimum
Sets the selected marker/delta marker to the next (higher) minimum of the selected
trace. If no marker is active, marker 1 is activated.
For spectrogram displays, define which frame the next minimum is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MINimum:NEXT on page 547
CALCulate<n>:MARKer<m>:MINimum:LEFT on page 546
CALCulate<n>:MARKer<m>:MINimum:RIGHt on page 547
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 549
CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 549
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 550
Marker Usage