Rohde & Schwarz ESW Series - Page 237

Common Analysis and Display Functions
R&S
®
ESW
237User Manual 1177.6298.02 ─ 08
"Absolute"
Determines the next maximum/minimum to either side of the current
peak.
"Right"
Determines the next maximum/minimum to the right of the current
peak.
Remote command:
Find a list of remote commands in Chapter 15.7.4.6, "Spectrogram Markers",
on page 551.
Search Mode for Next Peak in Y-Direction
Selects the search mode for the next peak search within all frames at the current
marker position.
"Up"
Determines the next maximum/minimum above the current peak (in
more recent frames).
"Absolute"
Determines the next maximum/minimum above or below the current
peak (in all frames).
"Down"
Determines the next maximum/minimum below the current peak (in
older frames).
Remote command:
Find a list of remote commands in Chapter 15.7.4.6, "Spectrogram Markers",
on page 551.
Marker Search Type
Defines the type of search to be performed in the spectrogram.
"X-Search"
Searches only within the currently selected frame.
"Y-Search"
Searches within all frames but only at the current frequency position.
"XY-Search"
Searches in all frames at all positions.
Remote command:
Find a list of remote commands in Chapter 15.7.4.6, "Spectrogram Markers",
on page 551.
Marker Search Area
Defines which frames the search is performed in.
"Visible"
Only the visible frames are searched.
"Memory"
All frames stored in the memory are searched.
Remote command:
CALCulate<n>:MARKer<m>:SPECtrogram:SARea on page 553
CALCulate<n>:DELTamarker<m>:SPECtrogram:SARea on page 557
11.4.3.3 Marker Positioning
The following functions set the currently selected marker to the result of a peak search
or set other characteristic values to the current marker value. These functions are
available as softkeys in the "Marker To" menu, which is displayed when you press the
[MKR ➙] key.
Marker Usage