Rohde & Schwarz ESW Series - Page 551

Remote Commands in the Receiver Application
R&S
®
ESW
551User Manual 1177.6298.02 ─ 08
CALCulate<n>:DELTamarker<m>:Y
Queries the result at the position of the specified delta marker.
Suffix:
<n>
.
1..n
<m> 1..n
Return values:
<Result> Result at the position of the delta marker.
The unit is variable and depends on the one you have currently
set.
Default unit: DBM
CALCulate<n>:MARKer<m>:Y
Queries the result at the position of the specified marker.
Suffix:
<n>
.
1..n
<m> 1..n
Return values:
<Result> Default unit: DBM
15.7.4.6 Spectrogram Markers
Marker Configuration
Commands to configure markers in spectrograms described elsewhere.
●
CALCulate<n>:MARKer<m>:MAXimum:LEFT on page 545
●
CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 546
●
CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 546
●
CALCulate<n>:MARKer<m>:MAXimum:RIGHt on page 546
●
CALCulate<n>:MARKer<m>:MINimum:LEFT on page 546
●
CALCulate<n>:MARKer<m>:MINimum:NEXT on page 547
●
CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 547
●
CALCulate<n>:MARKer<m>:MINimum:RIGHt on page 547
CALCulate<n>:MARKer<m>:SGRam:FRAMe................................................................... 552
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe...........................................................552
CALCulate<n>:MARKer<m>:SGRam:SARea....................................................................553
CALCulate<n>:MARKer<m>:SPECtrogram:SARea........................................................... 553
CALCulate<n>:MARKer<m>:SGRam:XY:MAXimum[:PEAK]...............................................553
CALCulate<n>:MARKer<m>:SPECtrogram:XY:MAXimum[:PEAK]...................................... 553
CALCulate<n>:MARKer<m>:SGRam:XY:MINimum[:PEAK]................................................553
CALCulate<n>:MARKer<m>:SPECtrogram:XY:MINimum[:PEAK]....................................... 553
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum:ABOVe.................................................553
Analysis