EasyManua.ls Logo

Rohde & Schwarz ESW Series - Page 545

Rohde & Schwarz ESW Series
759 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Commands in the Receiver Application
R&S
®
ESW
545User Manual 1177.6298.02 ─ 08
Example:
CALC:THR -82DBM
Sets the threshold value to -82 dBm.
Manual operation: See "Search Threshold" on page 236
CALCulate<n>:THReshold:STATe <State>
This command turns a threshold for the marker peak search on and off (for all markers
in all windows).
Suffix:
<n>
.
irrelevant
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:THR:STAT ON
Switches on the threshold line.
Manual operation: See "Deactivating All Search Limits" on page 236
15.7.4.4 Marker Positioning
Markers................................................................................................................. 545
Delta Markers........................................................................................................548
Markers
CALCulate<n>:MARKer<m>:MAXimum:LEFT...................................................................545
CALCulate<n>:MARKer<m>:MAXimum:NEXT..................................................................546
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]................................................................ 546
CALCulate<n>:MARKer<m>:MAXimum:RIGHt..................................................................546
CALCulate<n>:MARKer<m>:MINimum:LEFT....................................................................546
CALCulate<n>:MARKer<m>:MINimum:NEXT................................................................... 547
CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 547
CALCulate<n>:MARKer<m>:MINimum:RIGHt...................................................................547
CALCulate<n>:MARKer<m>:MAXimum:LEFT
This command moves a marker to the next lower peak.
The search includes only measurement values to the left of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
Analysis

Table of Contents

Related product manuals