Rohde & Schwarz ESW Series - Page 594

Remote Commands in the Receiver Application
R&S
®
ESW
594User Manual 1177.6298.02 ─ 08
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt...........................................................603
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]........................................................ 603
SYSTem:COMMunicate:PRINter:SELect<1|2>.................................................................. 604
DISPlay:LOGO <State>
Activates/deactivates the printout of the Rohde & Schwarz company logo at the top of
each page.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
Logo is printed.
0 | OFF
Logo is not printed.
*RST: 1
Example:
DISP:LOGO OFF
Manual operation: See "Print Logo" on page 281
HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
HCOP:ABOR
HCOPy:CMAP<it>:DEFault<ci>
This command defines the color scheme for print jobs.
For details see "Print Colors" on page 312.
Suffix:
<it>
.
Selects the item for which the color scheme is to be defined.
For more information see Chapter 15.9.5.3, "CMAP Suffix
Assignment", on page 646.
<ci> See table below
Example:
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a print-
out.
Manual operation: See "Print Colors" on page 312
Data Management