Rohde & Schwarz ESW Series - Page 603

Remote Commands in the Receiver Application
R&S
®
ESW
603User Manual 1177.6298.02 ─ 08
Parameters:
<arg0> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 437.
<arg1> String containing the name of the existing window.
By default, the name of a window is the same as its index.
To determine the name and index of all active windows in the
active channel, use the LAYout:CATalog[:WINDow]? query.
<arg2> 1 | 0 | ON | OFF
1 | ON
The window is included in the printout.
0 | OFF
The window is not included in the printout.
*RST: 1
Example:
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Manual operation: See "Print Multiple Windows" on page 281
HCOPy:TDSTamp:STATe<1|2> <arg0>
This command includes or excludes the time and date in the printout.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> 1 | 0 | ON | OFF
1 | ON
The time and date are printed.
0 | OFF
The time and date are not printed.
*RST: 1
Manual operation: See "Print Date and Time" on page 282
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
This command queries the name of the first available printer.
To query the name of other installed printers, use SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT] on page 603.
Manual operation:
See "Printer Name" on page 285
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
This command queries the name of available printers.
Data Management