Rohde & Schwarz ESW Series - Page 602

Remote Commands in the Receiver Application
R&S
®
ESW
602User Manual 1177.6298.02 ─ 08
Manual operation: See "Print Multiple Windows" on page 281
HCOPy:PAGE:WINDow<1|2>:COUNt <arg0>
This command defines how many windows are displayed on a single page of the print-
out for HCOPy:CONTent on page 596.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> integer
*RST: 1
Example:
HCOP:PAGE:WIND2:COUN 2
Manual operation: See "Windows Per Page" on page 286
HCOPy:PAGE:WINDow<1|2>:SCALe <arg0>
This command determines the scaling of the windows in the printout for HCOPy:
CONTent on page 596.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> 1 | 0 | ON | OFF
1 | ON
Each window is scaled to fit the page size optimally, not regard-
ing the aspect ratio of the original display. If more than one win-
dow is printed on one page (see HCOPy:PAGE:WINDow<1|2>:
COUNt on page 602), each window is printed in equal size.
("Size to fit")
0 | OFF
Each window is printed as large as possible while maintaining
the aspect ratio of the original display.
("Maintain aspect ratio")
*RST:
1
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See "Scaling" on page 286
HCOPy:PAGE:WINDow<1|2>:STATe <arg0>, <arg1>, <arg2>
This command selects the windows to be included in the printout for HCOPy:CONTent
on page 596.
Suffix:
<1|2>
.
irrelevant
Data Management