Rohde & Schwarz ESW Series - Page 601

Remote Commands in the Receiver Application
R&S
®
ESW
601User Manual 1177.6298.02 ─ 08
MM
millimeters
IN
inches
*RST: MM
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See "Margins" on page 287
HCOPy:PAGE:ORIentation<1|2> <arg0>
The command selects the page orientation of the printout.
The command is only available if the output device is a printer or a PDF file.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> LANDscape | PORTrait
*RST: PORTrait
Example:
HCOP:DEV:LANG1 PDF
HCOP:PAGE:ORI2 LAND
Manual operation: See "Orientation" on page 286
HCOPy:PAGE:WINDow<1|2>:CHANnel:STATe <arg0>, <arg1>
This command selects all windows of the specified channel to be included in the print-
out for HCOPy:CONTent on page 596.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 437.
<arg1> 1 | 0 | ON | OFF
1 | ON
The channel windows are included in the printout.
0 | OFF
The channel windows are not included in the printout.
*RST: 1
Example:
HCOP:CONT WIND
HCOP:PAGE:WIND2:CHAN 'IQ Analyzer',0
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Prints only window 1 in the IQ Analyzer channel.
Data Management