Remote Commands in the Receiver Application
R&S
®
ESW
596User Manual 1177.6298.02 ─ 08
Parameters:
<Color> BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRay | LGRay | LBLue | LGReen | LCYan |
LRED | LMAGenta
Example:
HCOP:CMAP2:PDEF GRE
Manual operation: See "Predefined Colors" on page 313
HCOPy:CONTent <arg0>
This command determines the type of content included in the printout.
This setting is independent of the printing device.
Parameters:
<arg0> WINDows | HCOPy
WINDows
Includes only the selected windows in the printout. All currently
active windows for the current channel (or "MultiView") are avail-
able for selection. How many windows are printed on a each
page of the printout is defined by HCOPy:PAGE:WINDow<1|2>:
COUNt on page 602.
This option is not available when copying to the clipboard
(HCOP:DEST 'SYST:COMM:CLIP' or an image file (see
HCOPy:DEVice:LANGuage<1|2> on page 597).
If the destination is currently set to an image file or the clipboard,
it is automatically changed to be a PDF file for the currently
selected printing device.
HCOPy
Selects all measurement results displayed on the screen for the
current channel (or "MultiView"): diagrams, traces, markers,
marker lists, limit lines, etc., including the channel bar and status
bar, for printout on a single page. Displayed items belonging to
the software user interface (e.g. softkeys) are not included. The
size and position of the elements in the printout is identical to the
screen display.
*RST:
HCOPy
Example:
HCOP:DEST1 'SYST:COMM:CLIP'
HCOP:CONT WIND
HCOP:DEST1?
//Result: 'MMEM'
HCOP:DEV:LANG1?
//Result: 'PDF'
"Print to clipboard" is automatically switched to "print to PDF file"
when the contents are switched to "multiple windows".
Manual operation: See "Print Screenshot" on page 281
See "Print Multiple Windows" on page 281
Data Management
To Next Page
Loading...
