Rohde & Schwarz ESW Series - Page 597

Remote Commands in the Receiver Application
R&S
®
ESW
597User Manual 1177.6298.02 ─ 08
HCOPy:DESTination<1|2> <arg0>
This command selects the destination of a print job.
Suffix:
<1|2>
.
Printing device.
Parameters:
<arg0> 'MMEM'
Sends the hardcopy to a file.
You can select the file name with MMEMory:NAME.
You can select the file format with HCOPy:DEVice:
LANGuage<1|2>.
'SYST:COMM:PRIN'
Sends the hardcopy to a printer.
You can select the printer with SYSTem:COMMunicate:
PRINter:SELect<1|2> .
'SYST:COMM:CLIP'
Sends the hardcopy to the clipboard.
The format should be WEMF.
*RST:
'SYST:COMM:CLIP'
Manual operation: See "Destination" on page 284
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State> ON | OFF | 0 | 1
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
Example:
HCOP:DEV:COL ON
HCOPy:DEVice:LANGuage<1|2> <arg0>
This command selects the file format for a print job.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> WMF | GDI | EWMF | BMP | PNG | JPEG | JPG | PDF | SVG |
DOC | RTF
Data Management