Rohde & Schwarz ESW Series - Page 286

Data Management
R&S
®
ESW
286User Manual 1177.6298.02 ─ 08
Page settings are (printing) device-specific. That means you can configure two differ-
ent printing devices (for example, a printer and a file) and switch between configura-
tions easily simply by selecting the appropriate device before printing.
Page settings are only available when printing on a printer or to a PDF file (see "Desti-
nation" on page 284).
Select Device 1/2........................................................................................................ 286
Orientation...................................................................................................................286
Windows Per Page......................................................................................................286
Scaling........................................................................................................................ 286
Margins....................................................................................................................... 287
Select Device 1/2
Selects the printing device to be configured.
Two different printout devices can be configured, for example one for printing and one
for storage to a file. When you execute the "Print immediately" function, the selected
printing device and its settings determine the behavior of the R&S ESW.
Orientation
Selects the page orientation of the printout: portrait or landscape.
Remote command:
HCOPy:PAGE:ORIentation<1|2> on page 601
Windows Per Page
Defines how many windows are displayed on a single page of the printout. This setting
is only available if Print Multiple Windows is active (see Chapter 12.6.1.1, "Print Con-
tent Settings", on page 280).
If more than one window is printed on one page, each window is printed in equal size.
Remote command:
HCOPy:PAGE:WINDow<1|2>:COUNt on page 602
Scaling
Determines the scaling of the windows in the printout if Print Multiple Windows is active
(see Chapter 12.6.1.1, "Print Content Settings", on page 280).
Creating Screenshots of Current Measurement Results and Settings