Remote Commands in the Receiver Application
R&S
®
ESW
612User Manual 1177.6298.02 ─ 08
Table 15-8: Available <items> in CISPR APD application
<Item> Description Default
DIAGram Screenshot of the measurement results. x
MARKers Contents of the marker table. x
SPECtrogram Screenshot of the spectrogram. x
RSUMMary Contents of the result summary. x
TRANsducer Characteristics of the transducer.
Table 15-9: Available <items> in spectrum application
<Item> Description Default
DIAGram Screenshot of the scan results. x
MARKers Contents of the marker table. x
PEAKlist Contents of the peak list. x
RESultlist Numerical measurement results.
RSUMmary Contents of the result summary. x
SETTings Settings that have been used during a measurement. x
SPECtrogram Screenshot of the spectrogram. x
TRANsducer Characteristics of the transducer.
Table 15-10: Available <items> in I/Q analyzer
<Item> Description Default
DIAGram Screenshot of the result diagram. x
FREQuency Screenshot of the Spectrum results. x
MAGNitude Screenshot of the Magnitude results. x
PEAKlist Contents of the peak list. x
RESultlist Numerical measurement results. x
RIMag Screenshot of the Real / Imaginary results. x
SETTings Settings that have been used during a measurement. x
TRANsducer Characteristics of the transducer.
VECTor Screenshot of the I/Q Vector results. x
Table 15-11: Available <items> in real-time application
<Item> Description Default
PSPectrum Screenshot of the persistence spectrum. x
RESultlist Numerical measurement results. x
SETTings Settings that have been used during a measurement. x
Data Management
To Next Page
Loading...
