Rohde & Schwarz ESW Series - Page 668

Remote Commands in the Receiver Application
R&S
®
ESW
668User Manual 1177.6298.02 ─ 08
ATT40
Mechanical Attenuation 40 DB
CAL
Mechanical Calibration Source
EATT
Electrical Attenuation Bypass
PREamp
Preamplifier Bypass
Return values:
<Cycles> Number of switching cycles.
Example:
DIAG:INFO:CCO? CAL
Usage: Query only
Manual operation: See "Relays Cycle Counter" on page 347
DIAGnostic:SERVice:BIOSinfo?
This command queries the BIOS version of the CPU board.
Return values:
<BiosInformation> String containing the BIOS version.
Example:
DIAG:SERV:BIOS?
Returns the BIOS version.
Usage: Query only
DIAGnostic:SERVice:HWINfo?
This command queries hardware information.
Return values:
<Hardware> String containing the following information for every hardware
component.
<component>: name of the hardware component
<serial#>: serial number of the component
<order#>: order number of the component
<model>: model of the component
<code>: code of the component
<revision>: revision of the component
<subrevision>: subrevision of the component
Example:
DIAG:SERV:HWIN?
Queries the hardware information.
"FRONTEND|100001/003|1300.3009|03|01|00|00",
"MOTHERBOARD|123456/002|1300.3080|02|00|00|00",
...
Usage: Query only
General Instrument Setup