Rohde & Schwarz ESW Series - Page 88

Applications
R&S
®
ESW
88User Manual 1177.6298.02 ─ 08
Remote command:
INST:SEL REC, see INSTrument[:SELect] on page 438
CISPR APD
The CISPR APD (Amplitude Probability Distribution) application provides measurement
functions to determine the likelihood of emissions being above a certain level.
For details see Chapter 9.4, "CISPR APD Measurements", on page 137.
Remote command:
INST:SEL APD, see INSTrument[:SELect] on page 438
Spectrum
In the Spectrum application the provided functions correspond to those of a conven-
tional spectrum analyzer. The analyzer measures the frequency spectrum of the RF
input signal over the selected frequency range with the selected resolution and sweep
time, or, for a fixed frequency, displays the waveform of the video signal. This applica-
tion is used in the initial configuration.
For details refer to the Spectrum Analyzer User Manual.
Remote command:
INST:SEL SAN, see INSTrument[:SELect] on page 438
I/Q Analyzer
The I/Q Analyzer application provides measurement and display functions for I/Q data.
For details see the I/Q Analyzer User Manual.
Remote command:
INST:SEL IQ, see INSTrument[:SELect] on page 438
Analog Demodulation
The Analog Demodulation application provides measurement functions for demodulat-
ing AM, FM, or PM signals.
For details see the Analog Demodulation User Manual.
Remote command:
INST:SEL ADEM, see INSTrument[:SELect] on page 438
Real-Time Spectrum
The Real-Time Spectrum application requires an instrument equipped with the Real-
Time Spectrum option. This application provides real-time measurement functions.
For details see the R&S ESW Real-Time User Manual.
Remote command:
INST:SEL RTIM, see INSTrument[:SELect] on page 438
Available Applications