Roland TrueVIS VG2-540 - Page 119

2. Set the print heater and dryer temperatures.
Procedure
1. Press [▲] or [▼] to set the "PRINT HEATER" temperature.
Recommended temperature: 40°C (104°F)
PRINT HEATER
30゜C 40゜C
2. Press [ENTER] to conrm your entry.
3. Press [▲] or [▼] to set the "DRYER" temperature.
Recommended temperature: 45°C (113°F)
4. Press [ENTER] to conrm your entry.
Cutting with Crop Marks
118 4. How to Cut with Crop Marks