Roland TrueVIS VG2-540 - If the Drain Bottle Exceeds Its Capacity Limit

If the Drain Bole Exceeds Its Capacity Limit
The drain bole collects discharged uid. You can dispose of discharged uid even if the message "EMPTY DRAIN
BOTTLE" is not displayed on the screen. Discard the discharged uid before the drain bole exceeds its capacity
limit.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
SUB MENU
MAINTENANCE
4. Press [▶] once, and then press [▼] several mes to display the screen shown below.
MAINTENANCE
DRAIN BOTTLE
5. Press [ENTER].
6. When the screen shown below appears, remove the drain bole and discard the discharged uid.
EMPTY
DRAIN BOTTLE
CAUTION
Before you detach the drain bole, be sure to wait for the screen to display "EMPTY
DRAIN BOTTLE." Aer discarding the discharged uid, promptly aach the drain bot-
tle to the machine.
Failing to follow this procedure may cause discharged uid to ow out of the tube and spill, soiling
your hands or the oor.
IMPORTANT
When you remove the drain bole, a few drops of discharged uid may come out of the machine. Exercise cauon to prevent
this uid from soiling your hands or the oor.
7. Quickly aach the emped drain bole to the machine once more.
8. Press [ENTER].
EMPTY
DRAIN BOTTLE
9. Press [ENTER].
RESET DRAIN
COUNTER
10. Press [MENU] to go back to the original screen.
Disposing of Discharged Fluid
2. Regular maintenance 227