Turning on Bluetooth Communicaon
This machine supports the operaon applicaon, which is an applicaon for mobile terminals. When using the
operaon applicaon, set this machine's Bluetooth communicaon to "ENABLE". However, when you are operat-
ing this machine from its operaon panel, you cannot perform operaons from the operaon applicaon.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
4. Press [▶] twice to display the screen shown below.
5. Press [▲] or [▼] to select "ENABLE".
6. Press [ENTER] to conrm your entry.
7. Press [◀] to display the screen shown below.
The current state is displayed on the screen.
ENABLE
Bluetooth communicaon is on, and the printer is waing for a connecon to be established. If you cannot oper-
ate this machine from the dedicated mobile operaon applicaon (hereinaer referred to as the "operaon appli-
caon") that you are using, there is a problem with the connecon environment.
P. 295「Printer Cannot Be Operated from the Dedicated Applicaon」
ENABLE* Bluetooth communicaon is on, and the printer is connected to the operaon applicaon.
However, when this screen is displayed, you cannot perform operaons from the operaon applicaon.
P. 197「Performing Operaons from the Dedicated Mobile Operaon Applicaon」
DISABLE Bluetooth communicaon is o.
ERROR An error has occurred in Bluetooth communicaon. Purchase them from your authorized Roland DG Corporaon
dealer.
8. Press [MENU] to go back to the original screen.
MEMO
• Default seng: "DISABLE"
• There are some precauons regarding Bluetooth communicaon. Refer to Important Notes on Using the Operaon Applica-
on(P. 200) for details.
• For details on the operaon applicaon, visit the Roland DG Corporaon website (hp://www.rolanddg.com/).
Managing the Basic Settings of the Printer
3. Optimizing Operation Management 213
To Next Page
Loading...
