Roland TrueVIS VG2-540 - Using Presets; Saving the Current Settings in Presets; Optimizing Work Efficiency

Saving the Current Sengs in Presets
Using the [PRESET] menu lets you easily change a wide variety of sengs to opmize them for the media.
Up to eight types of presets can be saved. You can assign a name to each one. Using media names for these may
aid recognion and clarity. Making changes for each menu item every me you change the media can be trouble-
some. That's why it can be useful to save the menu-item sengs opmized for an oen-used type of media as a
preset. The next me you use the media, you can change the menu-item sengs to the opmal values for the
media simply by loading the preset you saved.
Procedure
1. Press [MENU].
2. Press [▼] to display the screen shown below.
MENU
PRESET
3. Press [▶] once, and then press [▼] twice to display the screen shown below.
PRESET
SAVE
4. Press [▶] to display the screen shown below.
SAVE
NAME1
5. Decide on the preset number.
(1) Press [▲] or [▼] to select one opon from "NAME1" to "NAME8."
(2) Press [ENTER] to conrm your entry.
The current menu sengs are saved, and then the screen shown below appears.
SET NAME
S
6. Set the preset name.
(1) Press [▲] or [▼] to select a character.
(2) When you have selected the character you want to enter, press [▶].
The characters you can enter are "A" through "Z," "0" through "9," and the "-" character.
(3) Press [▲] or [▼] to select the next character.
Select the following characters in the same way. You can enter up to 15 characters, including spaces.
SET NAME
SAMPLE
(4) When you have nished, press [ENTER] to conrm your entry.
7. Press [MENU] to go back to the original screen.
The menu items that can be saved in presets are listed below.
Menu item
Reference page
[PRINT] (print heater), [DRYER]
P. 153「Seng the Print Heater Temperature」
P. 154「Seng the Dryer Temperature」
[PREHEATING]
P. 156「Seng the Temperature during Preheang」
[FEED FOR DRY]
P. 157「Drying the Trailing Edge of the Prinng Area on
the Dryer (When Only Prinng)」
Using Presets
190 2. Optimizing Work Efficiency