Roland TrueVIS VG2-540 - Using an Auxiliary Drying Unit

Using an Auxiliary Drying Unit
This seng is required when using an auxiliary drying unit. By using an auxiliary drying unit, you can dry the ink
faster.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
HEATER MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
HEATER MENU
OPTION DRYER
4. Press [▶] to display the screen shown below.
OPTION DRYER
DISABLE DISABLE
5. Press [▲] or [▼] to select "ENABLE".
6. Press [ENTER] to conrm your entry.
7. Press [MENU] to go back to the original screen.
MEMO
• Default seng: DISABLE
• For recommended auxiliary drying unit models, contact your authorized Roland DG Corporaon dealer or visit our website
(hp://www.rolanddg.com/).
• For details on how to use the auxiliary drying unit, refer to the documentaon of the drying unit you are using.
Adjusting the Ink-drying Method
1. Optimizing the Output Quality 161