Roland TrueVIS VG2-540 - Managing the Operations Appropriately and Efficiently; Setting the Current Date;Time and Using It for Maintenance

Seng the Current Date/Time and Using It for Maintenance
Set the current date/me. By seng this, when you perform a prinng test the prinng test date and me will be
printed alongside the printed test paern. When the message "TIME FOR MAINTENANCE" is displayed, the date/
me of the previous manual cleaning will be displayed. When this message is displayed, perform manual cleaning.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
4.
SUB MENU
CLOCK
5. Press [▶] to display the screen shown below.
CLOCK
DATE 2016/01/01
(1) Press [▲] or [▼] to set the year.
(2) Press [▶].
(3) Press [▲] or [▼] to set the month.
(4) Press [▶].
(5) Press [▲] or [▼] to set the day.
6. Press [ENTER] to conrm your entry.
7. Press [▼] or [▶] to display the screen shown below.
CLOCK
TIME 01:01:59
(1) Press [▲] or [▼] to set the hour.
(2) Press [▶].
(3) Press [▲] or [▼] to set the minute.
(4) Press [▶].
(5) Press [▲] or [▼] to set the second.
8. Press [ENTER] to conrm your entry.
9. Press [MENU] to go back to the original screen.
Managing the Operations Appropriately and Effi-
ciently
206 3. Optimizing Operation Management